When using composite bearings should pay attention to what place
Bearings are
fine parts, so when you use requires considerable caution. Even the use of
high-performance bearings, if used improperly, it can not reach the expected
performance results, and easy to make roller slide
rails damage. Therefore, the use of bearings should pay attention to the
following:
First, adhere to clean bearing and its surroundings, even
invisible dust into the bearings, will increase wear, vibration and noise of the
bearing.
Second, the use of the device to be careful, do not allow a strong
punch, does not allow a direct hit with a hammer bearing allowed after rolling
the delivery pressure.
Third, the application of appropriate and accurate
tool means, try to use special tools, trying to prevent the use of cloth and
stuff like short fibers.
Fourth, to avoid corrosion of bearings, bearing
directly by hand when handling, plenty to wash hands sweat, and coated with
high-quality mineral oil and then suspended operations during the rainy season
and summer with particular attention to rust. However, in certain special
operating conditions, bearings can achieve better at traditional computing life,
especially under light load conditions. These special operating conditions that,
when the outer rolling surface (track and rolling element) are effectively
separated and limit pollutants that might lead to a smooth film destruction. In
fact, under ideal conditions, the so-called permanent bearing life is
possible.
Fifth, the DU-H half
bushing life, the life of rolling bearings with number of revolutions (or
number of hours of work under a certain speed), defined: in this life bearing
within, should any attack on its rolling element bearing ring or initial fatigue
damage ( peeling or chipped). However, both in laboratory experiments or in the
Theory, we can clearly see the appearance under the same working conditions
identical bearings theoretical life different. There are also several different
definitions of bearing "life", one of the so-called "working life", it indicates
the theoretical life of a bearing can be reached before the damage is usually
not damaged by the white ptfe solid
lubricant type bushing,bearing,wear plate,pad and tear caused by fatigue,
but consists of wear, corrosion, seal damage and other reasons.